Features

• Double-filtered pilot-flow design for maximum reliability.
• Balanced-pressure diaphragm for long life.
• External bleed to manually flush system of dirt and debris during installation and system start-up.
• Internal bleed for spray-free manual operation.
• Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
• Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
• Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream.
• 1.25" (3,2 cm) stainless steel phillips head screws.
• Slip-by-slip configuration for low-cost, solvent-weld installations.
• Angle configuration for flexible installations especially when submains are deep.
• Male by male configuration for quick and easy manifolding.
• Male by barb configuration for installation with poly pipe. Available in 1" male by 1" barb and 1" male by 1 1/4" barb configurations.
• Accepts latching solenoid for use with Rain Bird battery-operated controllers.
• Optional conduit cover (DV-DUIT) available.

Operating Range

• Pressure: 15 to 150 psi (1,0 to 10,4 Bars)
• 075-DV Flow: 0.2 to 22 GPM (0,05 to 5,0 m³/h; 0,01 to 1,39 l/s).
  For flows below 3 GPM (0,75 m³/h; 0,21 l/s) or any Xerigation® application, use RBY-075-200MX Filter installed upstream.
• 100-DV Flow: 0.2 to 40 GPM (0,05 to 9,08 m³/h; 0,01 to 2,52 l/s).
  For flows below 3 GPM (0,75 m³/h; 0,21 l/s) or any Xerigation® application, use RBY-100-200MX Filter installed upstream.
• Temperature: Up to 110° F (43° C)
• Ambient air temperature: Up to 125° F (52° C)

Electrical Specifications

• 24 VAC 50/60 cycle solenoid power requirement:
  0.30 A (7.2 VA) inrush current; 0.19 A (4.6 VA) holding current
• Solenoid coil resistance: 54 Ohms

Dimensions

• Height: 4 1/2" (11,4 cm)
• Height (Angle): 5 1/2" (14 cm)
• Width: 3 1/3" (8,4 cm)
• Length: 4 3/8" (11,1 cm)
  Length (Angle): 3 3/4" (9,5 cm)
  Length (MM): 5 3/8" (13,6 cm)
  Length (MB): 5 3/4" (14,6 cm)

Models

• 075-DV: 3/4" (20/27)
• 100-DV: 1" (26/34)*
• 100-DV-SS: 1" (26/34)
• 100-DV-A: 1" (26/34)*
• 100-DV-MM: 1" (26/34)*
• 100-DV-MB: 1" (26/34)*
• 125-DV-MB: 1" (26/34) M x 1 1/4" (33/42) B
  *Available with BSP threads